Deda Elementi FastPro Carbon Aero Extensions 31.7mm – 410mm. - Options

Deda Elementi Fully Adjustable Carbon Extensions for Time Trial, Triathlon and Ultra Cycling.

The Deda FastPro is a premium carbon extension system developed specifically for time trial, triathlon and ultra-distance racing. Built around full UD carbon extensions, highly adjustable armrests and interchangeable 3D-printed grips, the FastPro allows riders to refine their aero position while maintaining compatibility with the major electronic shifting systems.

With extensive adjustment in extension length, armrest width, setback and spacer height, the FastPro is designed for riders who want a highly configurable cockpit without moving to a fully proprietary integrated front end.

Full UD Carbon Extensions – Built for Speed

The FastPro extensions use a full UD carbon construction to deliver the stiffness required for a stable aero position while keeping the system optimized for competitive riding.

The extensions measure 410 mm at full length and can be shortened through the adjustment range, giving riders significant flexibility when dialing in reach and hand position. The extensions themselves use a 22.2 mm diameter, while the complete system mounts to 31.7 mm handlebars.

30° Extension Geometry – Designed for a Modern High-Hands Position

Deda gives the FastPro extensions a 30° angle, creating the elevated hand position increasingly used in modern TT and triathlon fitting.

The system provides substantial vertical and longitudinal adjustment, allowing the rider to fine-tune forearm support, wrist position and overall aerodynamic posture according to individual fit requirements.

Highly Adjustable Armrest Platform

The FastPro offers extensive adjustment around the elbow and forearm support area.

The armrests measure 95 mm wide and can be positioned from 60 to 115 mm, with approximately ±20 mm of setback adjustment. This gives bike fitters and riders considerably more freedom to control elbow spacing and upper-body position.

The included 60 mm / 30° spacers establish the standard setup, while 20, 40, 80, 100 and 120 mm spacer options are available depending on configuration and generation.

Interchangeable 3D-Printed Grips

One of the FastPro's most useful features is its interchangeable grip system.

Deda offers dedicated grip configurations for different electronic remote shifters, allowing the controls to integrate directly into the end of the extensions rather than being adapted to a generic grip.

The standard FastPro version supports:

• Shimano SW-R9160
• SRAM eTap Clic ES-EAC-CLIC-A1
• Campagnolo EPS V4 TT

Dedicated FastPro versions are also available for:

• Shimano Satellite SW-R9150
• SRAM Blips EC-BLIP-B1

Three Versions for Different Electronic Shifting Systems

LafoBikes offers the FastPro in three configurations:

FastPro Standard – DED-FASTPRO
Includes the standard grip configuration compatible with Shimano SW-R9160, SRAM eTap Clic ES-EAC-CLIC-A1 and Campagnolo EPS V4 TT.

FastPro Shimano Satellite – DED-FASTPRO-SH
Includes dedicated grips designed specifically for the Shimano SW-R9150 Satellite remote shifters.

FastPro SRAM Blips – DED-FASTPRO-SR
Includes dedicated grips for SRAM EC-BLIP-B1 Blips.

Integrated Computer Mount and Armrest Pads Included

The FastPro system comes complete with an integrated computer mount and armrest pads, eliminating the need to source these essential cockpit components separately.

Deda's FastPro computer mount supports Garmin, Wahoo and Bryton computers through interchangeable inserts.

Compatible with a Wide Range of Deda Handlebars

The FastPro mounting system is designed for 31.7 mm handlebar clamp areas and is officially compatible with a wide range of Deda cockpits, including:

• Alanera RS with TT314 clip-on
• Superzero RS Carbon
• Superzero RS Alloy
• Superzero Gravel Carbon
• Superzero Gravel Alloy
• Gera Carbon
• Gera Alloy
• Zero100
• Zero2 DCR
• Zero2
• Zero1

Technical Specifications

• Intended Use: Time Trial / Triathlon / Ultra Cycling
• Extensions Material: Full UD carbon
• Spacers & Armrests: 6061 aluminum
• Grips: 3D printed
• Extension Diameter: 22.2 mm
• Handlebar Clamp Diameter: 31.7 mm
• Maximum Extension Length: 410 mm
• Adjustable Length: approximately 330/340 – 410 mm, depending on current Deda specification
• Extension Angle: 30°
• Extension Height: approximately 265/270 – 310/315 mm, depending on specification generation
• Armrest Width: 95 mm
• Armrest Adjustment: 60 – 115 mm
• Armrest Setback: ±20 mm
• Included Spacer Height: 60 mm
• Spacer Angle: 30°
• Optional Spacer Heights: 20 / 40 / 80 / 100 / 120 mm depending on current accessory availability
• Weight: 920 g
• Groupset Compatibility: Electronic
• Integrated Computer Mount: Included
• Armrest Pads: Included
• Computer Compatibility: Garmin / Wahoo / Bryton
• Color: Black

Available Versions

• DED-FASTPRO – Shimano SW-R9160 / SRAM eTap Clic / Campagnolo EPS V4 TT
• DED-FASTPRO-SH – Shimano SW-R9150 Satellite
• DED-FASTPRO-SR – SRAM EC-BLIP-B1 Blips

Compatibility Note: The FastPro is intended for electronic shifting systems. Make sure to select the correct grip version for your remote shifter before ordering.